Let’s dive right in. Nachos on the grill? Yes please.
I’ve only recently started digging into the back catalog of the crew at Bad Lip Reading. There are so many fantastic videos on that channel, but here’s one of my favorites from The Hunger Games.
This last one isn’t on YouTube, but it’s one of the funniest things I’ve seen in a long time. I rarely laugh out loud when I’m watching something alone, but while I watched this one I was laughing so hard that I was crying. It’s episode 4 of The Grand Tour. This is the new version of Top Gear with Clarkson, May and Hammond. The whole season has been fantastic but this was my favorite episode so far. If you have Amazon Prime, it’s free to watch.
Destin gets some very cool opportunities as part of his job and the Smarter Every Day channel. Thankfully he shares them with us! I’ve always wondered what it would feel like to pull a loop in a jet but I never thought about the feeling of making the inputs into the plane to get that loop to happen.
It’s hard to not use the Modern Rogue channel as all three of my videos this week, but here’s one of their best videos. Don’t try these at home. Especially if I’m around.
Bob Hoover is one of the greatest pilots the world has ever known. Check out this old video of him pouring an ice tea while performing an aileron roll… and oh yeah, the back of the plane was full of Generals.
In this first video, Jimmy Diresta makes a custom key for a very old lock. It’s a pretty cool way to resurrect something that would otherwise be garbage or decoration.
Matthias Wandel is not your typical woodworker. He uses wood to build precision tools and instruments. If you have an engineering mind, you’ll probably enjoy his channel. Here’s a recent example where he builds a small engine out of a solenoid.
I’ve followed Brian Brushwood for a long time but I’m a little late to the party on his Modern Rogue YouTube channel. It’s full of great videos and here’s one great example. I really want to try out this method for making a hologram out of some old CD cases and a phone.
The first video is look behind the scenes at some of the special effects in the most recent Star Wars movie. Some might say that this ruins the magic, but it just enhances my appreciation for the movie.
Zane Lamprey is still making great videos on his channel. They aren’t all about traveling or drinking. He made one recently full of cute little animals.
Frank Howarth’s YouTube woodworking videos are well-known for his use of clever time-lapse photography and incredible turnings on the lathe. This video encompasses both of them and while I haven’t been completely enamored with his CNC use, this bowl does turn out beautifully.
Jimmy Diresta starts off this week’s collection with a demonstration of a cool new CNC tool. It’s a standard router on a small handheld platform. You move it in the general direction that it needs to go and then it uses a camera to know where it is and make small adjustments to perfectly cut the design you loaded into it. This device has been in the works for quite a while and it looks like they are making a press push this week so there are lots of other videos available from other makers if you want more info.
The crazy Colin Furze is at it again. He built an ENORMOUS 360 degree swing in his back yard. The axle is the same height as his gutters. I hope his life insurance company doesn’t watch this. If you like this video, check out the two videos right before it on his channel where he shows you how he designed and made it.
And finally we’ll end with some mind bending physics talk. How can time be faster and slower at the same time depending on your observation point?
We see headlines all the time about two seemingly unrelated things. “Eat bugs and you’ll score 10% higher on SATs.” John Oliver had a great video talking about how the media completely misses the point of scientific studies, but it’s even worse than that. Even if you do your homework and read the scientific study, you still might not have the truth. This video does a good job of explaining why, but it comes down to statistics and false positives. For “real” science, studies need to be repeated by other researchers to replicate the results, but in this current social landscape, nobody cares about those replicated results because they take a long time, cost a lot of money, and they aren’t as interesting as the original attention-grabbing headline. Stick around to the end. He does a good job of wrapping it up and explaining that we’re not as doomed as the previous 10 minutes of the video might imply.
It’s time for another round of the best stuff that I’ve seen on YouTube recently. First up is a cheap way to add some weights to your shop. I inevitably finish a glue-up and then scrounge around looking for heavy stuff to put on top to hold the boards in place. I think I’ll need to make some of these:
When we travel with Elijah, the flight attendants always make a special point of telling us to put on our own masks before helping Elijah. Every time I think, “Yeah right. I’d help my kid first!” This video was the first time I understood why it’s important to put your own mask on first.
And finally, Minute Physics explains why it takes more acceleration to get to the sun than to other stars.
These blog posts were a great idea. Now I’m not just getting lost in YouTube videos, I’m researching content for this site!
First up is the ultimate Nerf gun. What it lacks in maneuverability, it makes up for in power and wow factor. There are a lot of other great videos on this guy’s channel too.
Hungry? How about a burger wrapped in bacon and filled with mac and cheese?
And finally, Colin Furze is at it again. This time he has the most outrageous doorbell you’ve ever seen. Spoiler alert: it involves an Uzi.
It’s time for another round of my favorite YouTube content from the past couple weeks. First up is a video from Mike Rowe explaining why you shouldn’t follow your dreams.
\
Next up is a very niche video that hit me perefctly. Grizzly sells a kit for my bandsaw that increases the capacity of the saw. It’s something I’ve thought about quite a few times already and it was awesome to see how easy it is to install.
\
April Wilkerson recently built a new base for her mom’s windmill. As part of the project, she also removed a bunch of the rust from the windmill. I never knew that you could use vinegar to remove rust!
I usually spend 15-30 minutes in front of the TV at the end of the night but I’m not watching TV. That time is almost always consumed with YouTube content. There’s so much good stuff to watch on there and I have a nice setup that downloads the content I’m interested in and puts it into my DVR so it’s really easy to see what I’ve watched and what is still in the queue.
Every once in a while I stumble across some really great content like the Adam Savage speech that I posted earlier this week. I’m going to try something new and every once in a while, I’ll make a post with some of the best videos that I’ve seen recently. So without further ado, here’s the first such post…
Just a few days ago I subscribed to a new channel called Cook With Meat. It’s delicious food and the videography is beautiful. The tequilla sunrise pulled pork recipe looks fantastic:
It took me a while to warm up to Jimmy Diresta. He’s a maker who previously had some small TV shows but now runs a very successful YouTube channel. Now I’m watching all of his stuff and even listening to his podcast. He knows how to incorporate a lot of different materials and techniques. One of his latest videos was a biplane scluped on the bandsaw.
Do you remember Zane Lamprey? He has done a lot of great shows like Three Sheets, Drinking Made Easy, and Chug. Now he’s focusing on YouTube. It’s the same formula where he travels the word looking at culture and drinking customs with a lot of laughter mixed in, but this time it’s a series of 3-5 minute videos and he’s traveling with his wife. He releases about three videos a week and he’s been at it for a while so there is a lot more where this came from.
Best Of YouTube
Jimmy Diresta starts off this week’s collection with a demonstration of a cool new CNC tool. It’s a standard router on a small handheld platform. You move it in the general direction that it needs to go and then it uses a camera to know where it is and make small adjustments to perfectly cut the design you loaded into it. This device has been in the works for quite a while and it looks like they are making a press push this week so there are lots of other videos available from other makers if you want more info.
The crazy Colin Furze is at it again. He built an ENORMOUS 360 degree swing in his back yard. The axle is the same height as his gutters. I hope his life insurance company doesn’t watch this. If you like this video, check out the two videos right before it on his channel where he shows you how he designed and made it.
And finally we’ll end with some mind bending physics talk. How can time be faster and slower at the same time depending on your observation point?