Lots of kids are injured every year from falling TVs. The number is increasing rapidly as people have moved from big heavy CRTs to light LCD TVs. The best number I could find was 12,000/year back in 2011. That’s not a huge number. There are plenty of riskier things to worry about first, but wall mounting the TV is something I’ve wanted to do anyway so this was a good excuse.
I picked up one of the more popular models from Monoprice for only $37. And I know some of you are content to leave your cables dangling down the walls, but that would drive me nuts in my own house. Running them through the wall is pretty simple with a kit like this for $40 from Amazon. It complies with code by splitting the box for the power and the low voltage cables.
Installation was pretty quick and simple: find two studs, drill the holes, and attach the mount to the wall. The laser level was a big help for this. That’s a paper bag you see taped to the wall to catch some of the dust.
Next I used the included templates to trace out the holes for the power extension kit and cut holes in the drywall. Yes, I could have just added a new outlet here, but doing it this way means that I can connect this outlet to my battery backup and add some extra protection for the TV.
The final step was attaching the mounting brackets to the back of the TV, removing the old base, and then hanging it on the wall. The mount pulls out pretty far from the wall so that the TV can swivel 90 degrees in each direction (nice if we are watching from the kitchen), and it also tilts in the other two directions. My mount is really level, but the 5 degrees of tilt would help you correct most mistakes.
I’m very happy with how this all turned out. It was pretty cheap and only took about 2 hours to finish. If you’re comfortable wiring an outlet and operating a drill, this is something you can accomplish. Just make sure you’re in the center of those studs! I used a stud finder and then pounded a small nail in multiple times across the entire face of the stud to find both edges. It’s all covered by the mount anyway so the extra holes don’t matter (and they are easily patched if needed.)
I’m still debating if this is a little too high. There’s plenty of adjustment in the mount that screws to the back of the TV so I might lower it just a bit.